2PK Oregon 198-153 Blades for 42″ Craftsman T110 13AN77XS093 CMXGRAM1130036

Showing 1 - 2 of 2 reviews

1. 

   Rated 5 out of 5

   Dejon Kulas – November 21, 2025

   Great set of blades very well made.blades are heavy weight and cut the grass really well.I recommend anyone that wants a good set of blades these are the ones reasonably priced

   [...]
2. 

   Rated 5 out of 5

   Danika Trantow – June 11, 2025

   These blades fit my Crastman T100 perfectly. However, installation was a bear. If this is your first time changing the blades, you might notice that the manufacturers installed blades may be on a little tight. (OK alotta tight) My advice, is get some PB Blaster or Liquid Wrench to initially try and loosen the blade nuts. Then, while blocking the motion of the blade with a C-clamp and a 2×4 block of wood, (see You Tubes video on blade installation),use a long sturdy breaking bar to firmly but gently loosen the bolts which hold the blades on. Be diligent!! It took a long series of failed attempts, and a strew of four letter expletives, before success was finally achieved. Once the old blades are removed, just make sure that the star formation on the new blade matches up with the star formation on the base of blade nut. The new blade should sit flat and not wobble. Install the new blade with the label on the blade facing the ground . Good Luck

   [...]